Udforsk disse idéer og meget mere!

WindowsLiveWriter_WoodpeckersIncraTSLSPackageNumber2Unboxi_14DD2_image_4.png (335×400)

WindowsLiveWriter_WoodpeckersIncraTSLSPackageNumber2Unboxi_14DD2_image_4.png (335×400)

pivoting outfeed table2

pivoting outfeed table2

#ClippedOnIssuu from Shopnotes issue 14

#ClippedOnIssuu from Shopnotes issue 14

Extendable Drill Press Table Plan - Drill Press Tips, Jigs and Fixtures | WoodArchivist.com

Extendable Drill Press Table Plan - Drill Press Tips, Jigs and Fixtures | WoodArchivist.com

Handy Drill Press Jig | Woodsmith Tips - created via http://pinthemall.net

Handy Drill Press Jig | Woodsmith Tips - created via http://pinthemall.net

workshop blueprints | garage workshop layout                                                                                                                                                                                 More

workshop blueprints | garage workshop layout More

Det kan være svært og uoverskueligt at rydde ud i sit tøj. Og nogen gange kan det næsten føles umuligt at skille sig af med bestemte stykker tøj, selvom man…

Det kan være svært og uoverskueligt at rydde ud i sit tøj. Og nogen gange kan det næsten føles umuligt at skille sig af med bestemte stykker tøj, selvom man…

Kreg Tool Tip: Working with Different Board Thicknesses | When joining boards of two different thicknesses edge-to-edge or end-to-edge, set your Kreg Jig® according to the thickness of the thinner board. The picture shows a ½"-thick board and ¾"-thick board that were joined with pocket holes. As you can see, the Kreg Jig® was set for ½"-thick material, the thinner board. We've also included a helpful chart that shows which Kreg Jig® setting and screw length to use based on material…

Kreg Tool Tip: Working with Different Board Thicknesses | When joining boards of two different thicknesses edge-to-edge or end-to-edge, set your Kreg Jig® according to the thickness of the thinner board. The picture shows a ½"-thick board and ¾"-thick board that were joined with pocket holes. As you can see, the Kreg Jig® was set for ½"-thick material, the thinner board. We've also included a helpful chart that shows which Kreg Jig® setting and screw length to use based on material…

Life Hacks Of The Month - 24 Pics

Life Hacks Of The Month - 24 Pics

DIY Tip of the Day: Cabinet Assembly Station. Here’s a third hand that will ensure square, no-hassle cabinet assemblies. Cut four 7-in. long 2x6s and screw or nail them to a plywood base, leaving exactly square crisscross channels just wide enough for the cabinet parts to fit in snugly. When you assemble the cabinet, the station will keep the parts vertical and aligned while you apply glue or pound in nails.

DIY Tip of the Day: Cabinet Assembly Station. Here’s a third hand that will ensure square, no-hassle cabinet assemblies. Cut four 7-in. long 2x6s and screw or nail them to a plywood base, leaving exactly square crisscross channels just wide enough for the cabinet parts to fit in snugly. When you assemble the cabinet, the station will keep the parts vertical and aligned while you apply glue or pound in nails.

Pinterest
Søg